US773 Anti-static Reflective FR Winter Jacket, Yellow – Portwest

Description

ok

The Portwest US773 is made from “Bizflame Rain”, a unique blend of 98% polyester with 2% carbon fiber. This material is: bright, fire resistant, waterproof, breathable and finished with chemical resistance. Garment is FR treated and fire resistant properties will diminish after 12 washes.

The jacket is reflective and highly visible. Certified high visibility clothing illuminates the individual and makes them recognizable as a human. The reflective material along the shoulders, chest, waist and arms significantly improve visibility in low-light working conditions. High visibility significantly minimizes the chance of accidental injury in the workplace.

• 7.5oz Bizflame Rain (98% Polyester, 2% Carbon Fiber)
• Permanently anti-static
• FR Properties last 12 machine washes
• Highly visible and reflective
• Breathable to prevent sweat
• Waterproof
• Chemical resistant finish to maintain FR and High Visibility properties.
• Full-length zipper with storm flap
• Fully insulated
• 2x – Mic tabs
• Detachable hood
• Velcro adjustable cuffs

4 Pockets

• 1x – Cell phone pocket
• 2x – Side pockets w/ flap
• 1x – Internal pocket

Materials

• Shell – 7.5oz Bizflame Rain (98% Polyester, 2% Carbon Fiber)
• Lining – 5oz Cotton Fire Resistant Lining
• Insulation – 3oz Polyester Fire Resistant Lining

Washing Instructions

• Use non-biological powder
• Do not use softener
• Machine wash warm, Mild process
• Do not bleach, tumble dry, iron or dry clean
• Drip line dry

The Portwest US773 Bizflame, a lightweight, high visibility, flame resistant, waterproof and highly breathable insulated bomber jacket. The US733 is equipped with heat resistant reflective tape on the shoulders, arms, chest and waist. Designed to reflective light and catch the eye of all those around you; the reflective ensures you can be seen in low visibility situations.

The ANSI 107 safety standard is a specific set of regulations for defining High-visibility Safety Apparel.

The 2015 revision of the ANSI 107 standard consolidated classifications into Type and Class.

Type R – Designates this product is intended for ROADWAY use.
Class 3 – Specifies this product meets the following minimum requirements:
– 1240 in² of background material
– 310 in² of reflective material
– 2″ (1″ for split designs) width of reflective material

The EN 1149-5 Safety Standard specifically tests the ability of a fabric to protect the wearer against the danger of static electricity.

This product MEETS the performance requirements set by the EN 1149-5 standard. This product is fully capable to protect the wearer against the danger posed by static electricity.

The EN 13034 standard tests whether a product products limited protection against liquid chemicals.

This standard specifies this product meets the following specification:

“Seams should minimize or prevent penetration of liquid through stitch holes or other components of a seam. Seam strength must obtain at least Class 1 (>30N).”

EN 343 specifies the protection a garment and its seam can provide against moisture such like: Rain, Snow, Fog and Humidity.

Test on Fabric: Class 3 – Garment meets the max (13000 Pa) water resistance rating.
Test on Seams: Class 1 – Garment meets the minimum (8000 Pa) water resistance rating.

The EN ISO 20471 classification is an international standard of requirements and test methods of high visibility workwear.

A Class 3 certification specifies this garment meets the required minimum of 0.20sqm of reflective tape and the 0.80sqm of Fluorescent Material.

Additional information