3M DBI-SALA

Sliding Beam Anchor – Fits beam flange 3-1/2 to 14 in wide – Corrosion resistant – Fully adjustable – Guarded lock – Replaceable wear pads – 3M PROTECTA 2104703

$193.00 + Free Shipping

Bulk Discount Pricing:
QTY3+6+9+
Price$183.35$179.49$173.70
  • Sliding anchor point – Unlike the fixed beam anchor – this d-ring slides freely throughout the anchor to provide the connected user a bit more freedom.
  • Hands-free Mobility – D-ring allows user to work hands-free and focus on the task at hand.
  • Rugged Durability – Built from high-strength corrosion resistant materials and meets ANSI standards for weather, environment and storage conditions.
  • Portable beam anchor – The anchor is lightweight, portable, easy to transport between job-sites and store when not in use.
  • Easy adjustment – Dual ratcheting adjustment buttons make it easy for user to adjust anchor to I-beam width.
  • Replaceable Pads – After a while the pads will begin to wear – but the easy snap-in replacement pads make it easy to replace.
Get FREE SHIPPING when you spend $100 or more!
SKU: 2104703 Categories: , , Tag:

Bulk Quote

Submit a request for bulk discount rates. Use this for large quantity orders that exceed the page quantity price breaks. Quotes are typically processed within 1 business day.

Free Bulk Quote

Product Videos

You may also like…

  • 3M DBI-SALA

    Permanent Roof Anchor with Flashing and Cap – FITS 2″ X 10″ TO 2″ X 12″ – 3M DBI-SALA 2103671

    $121.00
  • 3M DBI-SALA

    Reusable Roof Anchor For Standing Seam Roofs – For flat or sloped standing seam roofs – Non-penetrating design – Portable – Reusable clamps – 3M PROTECTA 2190072

    $408.00

  • RailDog Sliding Rail Anchor – Installs onto 2-3/4 in. to 3-1/4 in. wide rails – Hands free horizontal mobility – Stainless steel – Carabiner – 3M PROTECTA 2199938

    $333.00
  • 3M DBI-SALA

    Knock-Down Disposable Roof Anchor (12 Pack) – For sloped or flat wooden roofs – Fast and easy nail installation – Stamped design is bent to fit roof – 3M PROTECTA 2103680

    Best Seller
    $102.00($8.50 / per unit)
  • 3M DBI-SALA

    Concrete D-ring Anchorage Plate – Concrete bolt kit w/ 4 bolts included – Bolts to structure or fall arrest anchor point – Pre-drilled 14.3mm holes – 3M PROTECTA AJ720A

    $61.00
  • 3M DBI-SALA

    Concrete Strut Anchor – Complete hands-free horizontal mobility – Accommodates 1-5/8 in. wide struts – Stainless Steel – Saflok steel carabiner – 3M PROTECTA AN220A

    $92.05
  • 3M DBI-SALA

    42in. Concrete Anchor Strap (25 Pack) – D-ring at one end web loop on other – Slips over rebar – Abrasion resistant wear pad – Disposable design – 3M PROTECTA 2190057

    Best Seller
    $321.00($12.84 / per unit)
  • 3M DBI-SALA

    42in. Concrete Anchor Strap (25 Pack) – Web loop on each end – Slips over rebar – Abrasion resistant wear pad – Disposable design – 3M PROTECTA 2190063

    Best Seller
    $234.00($9.36 / per unit)

  • Freestanding Roof Top Anchor – Non-penetrating design – Built-in shock absorber – Sixteen 45 lbs. counterweights – Portable and reusable – 3M DBI-SALA 2100185

    $4,511.36
  • 3M DBI-SALA

    U Maxi Clamp kit (4 pack) – Single standing seam roof mounting clamps – For use with 2100138 roof anchor – Anti-corrosion finish – 3M DBI-SALA 7241208

    $319.00($79.75 / per unit)

    • Description

    Reusable sliding beam anchor

    3M PROTECTA Sliding Beam Anchor – A reusable steel beam anchor with free-flowing steel d-ring for worker tie-off while working at height.

    The user connects to the D-ring, allowing her to work hands-free and focus on the task – not the anchor. The anchor is made from high quality steel and aluminum parts and finished with a anti-corrosion coating. The anchor is lightweight, easy to transport between job sites and store when no in use.

     

     

    Simple Accident-proof Installation

    With a newly redesigned adjustment system, the anchor can install directly onto large variety of steel beams ranging from 3.5″ up to 14″ wide flange.

    To ensure proper safe installation, the adjustment controls and locking mechanisms are located on completely separate spots of the anchor. The dual ratcheting adjustment buttons are located on the top of the beam and easily accessible to the attached user. The locking mechanism is located on the complete opposite side to reduce the chance of accidental engagement.

     

    Resources

    Additional information

    Mpn2104703
    Weight4.5 lbs
    Dimensions12 × 12 × 12 in
    Brand

    Anchor Installation Type

    Reusable

    Reviews

    There are no reviews yet.

    Be the first to review “Sliding Beam Anchor – Fits beam flange 3-1/2 to 14 in wide – Corrosion resistant – Fully adjustable – Guarded lock – Replaceable wear pads – 3M PROTECTA 2104703”