3M DBI-SALA

  • Permanent Roof Anchor – Includes leak-proof flashing to protect roof – Fits up to 2×8 wooden frame – Easy Bolt/Clamp Installation – Stainless steel D-ring – 3M DBI-SALA 2103670

    $75.00
  • Concrete D-ring Anchorage Plate – Concrete bolt kit w/ 4 bolts included – Bolts to structure or fall arrest anchor point – Pre-drilled 14.3mm holes – 3M PROTECTA AJ720A

    $39.00
  • PS54 Endurance Plus Hard Hat – White ABS shell hard hat – 6-point wheel ratchet adjustment – Sweatband – Chinstrap – Tested up to 20,000 volts – Portwest PS54

    $12.50
  • Sliding Beam Anchor – Fits beam flange 3-1/2 to 14 in wide – Corrosion resistant – Fully adjustable – Guarded lock – Replaceable wear pads – 3M PROTECTA 2104703

    $135.43
  • Reusable Roof Anchor For Standing Seam Roofs – For flat or sloped standing seam roofs – Non-penetrating design – Portable – Reusable clamps – 3M PROTECTA 2190072

    $287.14
  • Knock-Down Disposable Roof Anchor (12 Pack) – For sloped or flat wooden roofs – Fast and easy nail installation – Stamped design is bent to fit roof – 3M PROTECTA 2103680

    $120.00($10.00 / per unit)
  • 42in. Concrete Anchor Strap (25 Pack) – Web loop on each end – Slips over rebar – Abrasion resistant wear pad – Disposable design – 3M PROTECTA 2190063

    $150.00($6.00 / per unit)
  • 42in. Concrete Anchor Strap (25 Pack) – D-ring at one end web loop on other – Slips over rebar – Abrasion resistant wear pad – Disposable design – 3M PROTECTA 2190057

    $204.00($8.16 / per unit)
  • Concrete Strut Anchor – Complete hands-free horizontal mobility – Accommodates 1-5/8 in. wide struts – Stainless Steel – Saflok steel carabiner – 3M PROTECTA AN220A

    $81.00
  • U Maxi Clamp kit (4 pack) – Single standing seam roof mounting clamps – For use with 2100138 roof anchor – Anti-corrosion finish – 3M DBI-SALA 7241208

    $223.71($55.93 / per unit)
  • E Maxi Clamp kit (4 pack) – Double standing seam roofs mounting clamps – For use with 2100138 roof anchor – Anti-corrosion finish – 3M DBI-SALA 7241206

    $265.00($66.25 / per unit)
  • Z Maxi Clamp kit – Standing Seam Roof Mounting Clamps (4 pack) – For standing seam roof anchor – Fits bulb type standing seams – Sold in packs of 4 – 3M DBI-SALA 7241204

    $290.57($72.64 / per unit)
  • 30 ft. Box frame fall arrest system – 30 ft. fixed anchor height – Dual 32 ft. fall arrest rails with trolley – 16 in. Pneumatic wheels – 3M DBI-SALA 8530427

    $37,662.00
  • 21 ft. Box Frame fall arrest system – 21 ft. fixed anchor height – Single 28 ft. fall arrest rail with trolley – 12 in. Rubber wheels – 3M DBI-SALA 8530361

    $31,633.00
  • 14ft. Fixed-height Box-frame fall arrest system – 14ft. anchor height – Dual 15 ft. fall arrest rails with trolley – 16 in. pneumatic wheels – 3M DBI-SALA 8530345

    $38,775.00
  • Adjustable box frame fall arrest system – 12 ft. to 18 ft. adjustable anchor height – 20 ft. wide fall arrest rail and trolley – Easy detent pin style adjustment – 3M DBI-SALA 8530288

    $30,759.00
  • Cable Anchorage Extension – 4ft cable anchor extension – 7×19 galvanized steel cable with vinyl – Steel snap hook on one end – Steel O-ring on the other – 3M PROTECTA AJ408AG4

    $56.57$68.57
  • Cable Tie-off Adapter – 6ft pass-thru type tie-off adapter – Steel O-ring – 9.5mm 7×19 galvanized steel cable – 3M PROTECTA 2100193

    $43.29$50.57
  • Flexiguard Supported Ladder System – Non-slip work platform with 12 ft. fall arrest rail & two trolleys – Includes stabilizing jacks, outriggers & wheels – Spring load swing gates – 3M DBI-SALA 8530397

    $23,000.00
  • FlexiGuard Sky Anchor Base – Top floor mount base – Bolt or weld to steel floors – PVC mast sleeve liner – Permanent Installation – 3M DBI-SALA 8530210

    $1,239.64
  • FlexiGuard Sky Anchor Base – Core mount sleeve – Slips into 4 in. concrete or steel core hole – PVC mast sleeve liner – Permanent Installation – 3M DBI-SALA 8530314

    $513.00
  • FlexiGuard Sky Anchor Base – Flush floor mount design – Bolt-in installation to concrete/steel floors – PVC mast sleeve liner – Permanent Installation – 3M DBI-SALA 8530162

    $980.36
  • FlexiGuard Sky Anchor System – Fixed anchor height – 6 ft. safe working radius from anchor – 360-degree mast rotation – Collapsible design for easy setup/break-down – 3M DBI-SALA 8530152 8530161 8530387 8530320

    $8,582.00$12,259.29
  • Flexiguard Freestanding Ladder System – Adjustable height platform with winch – Fall arrest bar – 16 in. pneumatic wheels – Allows for easy access to elevated work areas – Supports 2 workers max – 3M DBI-SALA 8517715 8517717 8517719

    $38,617.50$49,651.07
  • Flexiguard A-frame fall arrest system – Fixed-height 2-user fall arrest system – Rigid rail with two sliding anchor points – 16-inch rubber molded wheels – Supports 2 workers max – 3M DBI-SALA

    $22,821.43$36,776.79
  • Flexiguard A-frame fall arrest system – Adjustable anchor height from 16 to 23 ft. – Rigid rail with two sliding anchor points – 16-inch foam filled wheels – Supports 2 workers max – 3M DBI-SALA 8517780 8517781

    $45,767.00$49,036.07
  • Adjustable C-frame fall arrest system – Adjustable overhead rail with 2 trolleys – 16 in. Pneumatic wheels – 2 user max capacity – Built-in leveling jacks – 3M DBI-SALA Flexiguard

    $38,002.50$49,036.07
  • Counterweighted Rail System, 2 User Max – Fixed rail anchor with trolley – 22 ft. anchor height – 32 ft. rail width – 8 ft. offset – 3M DBI-SALA Flexiguard 8517760 8517761

    $34,324.29$35,183.57
  • Stabilizing Jack Kit for Flexiguard Base – Jack leveling kit for uneven surfaces – Top wind crank handle for raising and lowering base – Includes: four independent jack legs to stabilize base on even surfaces – DBI-SALA 8530563

    $2,083.93
  • Flexiguard Jib counterweight base – 5000 lb. portable base for EMU system – For use on flat surfaces – Temporary installation – 360 degree jib mast rotation – 3M DBI-SALA 8530566

    $6,966.43$7,969.29
  • Showing 1–30 of 96 results